VIVOSUN Grow Tent Kit 2×4 Complete System WiFi controlled full spectrum grow lights
Category: Grow Lights
Check Current PriceYes, the VIVOSUN Grow Tent Kit 2×4 Complete System suits first-time indoor growers well. It bundles a LumaLight 200W, R4 fan, GrowHub A22, and accessories. The kit’s Grow Lights deliver full-spectrum LED coverage for seed-to-harvest stages.
VIVOSUN Grow Tent Kit 2×4 Complete System setup guide
Install the VIVOSUN 2×4 Grow Tent Kit using the included frame, light, fan, controller, and straps. Mount the LumaLight 200W grow lights 24-30 inches above seedlings for even coverage while avoiding hot spots. Connect the R4 inline fan to the carbon filter and ducting to control odor and move air effectively. Use the GrowHub A22 app to schedule cycles, monitor temperature, and automate devices for reliable runs.
How do I assemble the 2×4 grow tent and frame safely?
VIVOSUN tent frame secures poles and corners to create a rigid structure. Assemble the 48″ x 24″ x 60″ shelter on a clean, level floor before you mount equipment. Hang the LumaLight 200W from the tent ceiling bars using the supplied rope hangers and straps, and keep light cables tethered away from water. Tighten corner clips and test all zippers; avoid sagging that could change light angles and stress plants.
Essential components and accessories for beginner indoor grows
VIVOSUN Grow Lights kit includes tent, LumaLight 200W, R4 fan, GrowHub A22, carbon filter, ducting, grow bag, trellis, and tools. This package supplies seed-to-harvest gear for one 5-gallon grow bag or a small soil tray and supports one full cannabis, vegetable, or ornamental cycle. Included parts meet common beginner needs, and you can upgrade the light or ventilation later for larger yields. Expect to use a home WiFi network for the GrowHub A22 app and schedule control.
What lighting schedule and distance suit seedlings in a 2×4?
LumaLight 200W delivers adjustable output for seedlings. Start seedlings on an 18-hour on, 6-hour off light schedule to promote compact vegetative growth. Place the lamp 24 inches above seedlings for the first week, then raise slowly to 30 inches as plants thicken. Dim or raise distance if leaves show heat stress or stretch. Balance PAR (photosynthetically active radiation) and intensity by adjusting height or dimming to match plant responses.
Technical specifications and measurements for kit components
- Tent dimensions: 48″ x 24″ x 60″
- Light: LumaLight 200W, full-spectrum LED with 3000K, 5000K, 660nm, 730nm diodes
- Fan: R Series R4 4″ inline fan 195 CFM, 2300 RPM, noise <30 dB
- Controller: GrowHub A22 WiFi, scheduling, temperature control, app-based automation
- Included gear: 4″ carbon filter, 4″ ducting, 4″ prefilter, 5 gal grow bag, 2 ft trellis net, pruning shears
2×4 Grow Tent Kit Grow Lights specifications help buyers compare output, airflow, and control before purchase. The 195 CFM (cubic feet per minute) R4 fan controls humidity and pairs with the 4″ carbon filter to reduce odors and pollen. Pair the fan with the prefilter to extend filter life in dusty environments. WiFi control via GrowHub A22 simplifies timers and remote adjustments for new growers, reducing manual errors.
VIVOSUN Grow Tent Kit 2×4 Complete System troubleshooting tips
Troubleshoot common problems by checking ventilation, light distance, water schedule, and controller connections. For fan or filter airflow issues, inspect ducting for kinks and loose clamps that reduce flow. Confirm the R4 fan reaches about 2300 RPM and delivers 195 CFM to exchange air properly. The complete kit retails around $459.99, so pre-purchase checks can reduce returns and surprises. If GrowHub A22 loses WiFi, restart the controller and check your router compatibility and the 2.4 GHz band.
How can I prevent high humidity and mold in a small grow space?
R4 inline fan reduces humidity and lowers mold risk. Increase air exchanges to at least four room volumes per hour in a 2×4 tent to control moisture buildup. Use the included carbon filter and prefilter to trap spores while the R4 fan exhausts humid air to the outside. Run a small oscillating fan inside the tent for gentle circulation to prevent stagnant pockets that foster mold. Lower night watering and increase lights-off ventilation to keep relative humidity under 60 percent in most climates.
Common follow-up questions beginners ask
Can the LumaLight 200W handle flowering? Yes, its 3000K, 660nm, and 730nm diodes support bloom-phase spectral needs. rated PAR output is not provided by the manufacturer, so expect moderate commercial-level yields compared with higher PAR fixtures. You can supplement with additional LEDs later for denser buds.
Do I need a separate dehumidifier? Often the R4 fan and passive vents suffice in dry climates with relative humidity under 60 percent. In humid regions such as Florida or coastal areas, add a small dehumidifier sized for the tent volume to prevent mildew. Monitor RH with a hygrometer and adjust ventilation or dehumidification as plants grow denser.
Can I use a mechanical timer instead of the GrowHub A22 app? Yes, a basic mechanical or digital timer controls on/off cycles for lights and fans. using a timer removes remote scheduling, temperature-based automation, and alerts that the GrowHub A22 provides. If you value automation, keep the WiFi controller; for simple setups, a reliable timer will work.
Next search queries you might try
- How much electricity does a 200W LED cost per month for a 2×4 tent?
- Which replacement LEDs provide higher PAR for the LumaLight 200W?
- How to size a dehumidifier for a 48″ x 24″ x 60″ grow tent?